top of page
Untitled design (46).png
Frame 2147224979.webp
Frame 2147225010 (8).png
Frame 2147225011 (13).png
Frame 2147225012 (8).png
Frame 2147225011 (12).png

Cenobot Vacuum SP50

Autonomous Spot-Cleaning Vacuum for Daytime Sanitary Maintenance

The Cenobot SP50 vacuums and sweeps large commercial floors while detecting over 30 types of waste and debris with 99 percent accuracy. It cleans only where cleaning is needed, extending coverage efficiency and enabling continuous daytime operation in retail, healthcare, hospitality, and transport environments.

Technical Specifications

Category
Specification
Minimum Passage Width
800 mm
Minimum Distance from Wall
Under 5 cm
Max Vacuum Suction
25 kPa
Max Moving Speed
2.68 mph (approximately 1.2 m/s)
Minimum Turn-Around Width
47 inches (approximately 1,200 mm)
Cleaning Efficiency (regular mode)
Up to 1,987 square metres per hour
Cleaning Efficiency (patrol / spot mode)
Up to 19,870 square metres per hour
Battery
120 Ah lithium iron phosphate
Battery Life (regular cleaning)
Up to 8 hours
Battery Life (spot cleaning)
Up to 13 hours
Charging Time
4 hours
Gradability
Up to 6 degrees
Navigation
32-beam 3D LiDAR, NVIDIA AI edge computing chip, 360-degree safety sensor system
Waste Detection
Over 30 debris and waste types detected at 99 percent accuracy
Software Updates
Over-the-air, no on-site technician required
Operating Environments
Hotels, hospitals, schools, shopping centres, offices, transport hubs, libraries
Platform Integration
Connected to HelloGard Intelligence for fleet monitoring, scheduling, and management

Why Detecting Before Cleaning Is More Efficient Than Cleaning Everything

Frame 2085665764 (64).png

Cleans Where It Is Needed, Not Where It Isn't

Standard vacuum robots run the same route at the same pace regardless of floor condition. The SP50 detects what is actually on the floor and targets cleaning there, which means better results with less time and energy per session

Frame 2085665764 (65).png

Up to 13 Hours Without Recharging

In spot cleaning mode, the SP50 runs up to 13 hours on a single charge, covering facilities across a full operational day and into the evening without interruption

Frame 2085665764 (66).png

Detects What Others Miss

The 99 percent detection accuracy across 30-plus waste types means the SP50 identifies and responds to fine dust, larger debris, and varied spill types that trigger-based or schedule-only robots move past

Frame 2085665764 (67).png

Built for Active Daytime Environments

The SP50 is designed to operate alongside people during open hours, navigating around foot traffic and obstacles in real time without requiring cleared floors or off-hours scheduling

image (22).png

What Intelligent Daytime Vacuuming Looks Like in Practice

​Measurable gains across teams, spaces, and workflows.

Maintain clean floors across large commercial spaces throughout open hours without staff involvement

Cover more ground per session through targeted spot cleaning rather than constant-intensity full-floor runs

Run up to 13 hours of autonomous floor maintenance on a single charge without mid-shift interruption

Monitor cleaning coverage, session data, and robot status remotely through HelloGard Intelligence

Cta.jpg
Explore How Cenobot Vacuum SP50 Fits Into Your Operations
Robots
​Other Products

Fast, contactless delivery in healthcare facilities, hospitality environments, and commercial spaces where agile navigation and guest interaction are essential.

Gausium Beetle.png

Autonomous last mile delivery across large campuses and mixed indoor–outdoor environments such as enterprise complexes, retail destinations, and public spaces.

Gausium Phantas.png

Automated transport of supplies, meals, and operational items across structured indoor facilities with multi-point delivery requirements.

KleenBot C40.png

Built for Intelligent, High-Efficiency Floor Vacuuming 

The Cenobot SP50 is a commercial autonomous vacuum and sweeping robot that uses 3D LiDAR and an NVIDIA AI computing chip to detect waste and debris on the floor in real time. Rather than cleaning on a fixed route at constant intensity, it identifies where cleaning is needed and targets those areas specifically, delivering up to 8 times the efficiency of standard scheduled vacuum runs. With 25 kPa suction power, a 120 Ah battery, and up to 13 hours of spot-cleaning runtime, it covers large facilities across full shifts without staff involvement. Through HelloGard Intelligence, SP50 units are scheduled and monitored alongside other cleaning, delivery, or security robots operating in the same facility, one platform, full operational visibility, no per-vendor management.

What the SP50 Does Across a Full Operational Day

01

Daytime Autonomous Floor Maintenance

Run continuous vacuum and sweep coverage across commercial floors during open hours without disrupting staff or visitors

02

Targeted Spot Stain and Debris Removal

The SP50 detects waste and debris on the floor in real time and cleans only those areas, covering far more ground per session than constant-intensity scheduled runs

03

Large-Area Scheduled Cleaning

Deploy across pre-defined zones for routine scheduled cleaning across hospitals, retail stores, and transport facilities without staff coordination

04

Close-Wall Perimeter Vacuuming

Operates within 5 cm of walls, covering perimeter areas and edges as part of the standard automated run without manual follow-up

Component 2.png

What 99% Detection Accuracy Changes About Vacuuming

Detects Over 30 Waste and Debris Types at 99 Percent Accuracy

The SP50 identifies what is on the floor, including fine dust, larger debris, and wet spills, and adjusts its cleaning method based on the type and size of waste detected

Spot Cleaning Mode

The robot patrols its zone, detects areas that need cleaning, and targets only those spots rather than running the entire floor at constant intensity, delivering significantly better coverage per session

25 kPa Suction Power

High-pressure suction lifts fine dust, larger debris, and varied waste types from both hard floors and carpet surfaces in a single pass

3D LiDAR with NVIDIA AI Processing

A 32-beam 3D LiDAR sensor combined with an NVIDIA AI edge computing chip delivers obstacle detection, environmental mapping, and real-time routing across large and complex floor plans

Up to 13 Hours in Spot Cleaning Mode

Extended runtime means the SP50 can patrol and clean across a full operational day and into the evening on a single charge

Close-Wall Operation Within 5 cm

The SP50 operates within 5 cm of walls and automatically resumes from its last position if interrupted, ensuring complete perimeter and edge coverage

Where Daytime Cleaning Can't Wait for Off-Hours

Retail Stores and Shopping Centres

Hospitals and Healthcare Facilities

Hotels and Hospitality Properties

Airports and Transport Hubs

bottom of page